Skip to main content

CAN A MECHANICAL ENGINEER GET A JOB IN IT INDUSTRY AND IS IT WORTH?

CAN A MECHANICAL ENGINEER GET A JOB IN IT INDUSTRY AND IS IT WORTH?

 

Mechanical engineering is one of the evergreen engineering disciplines among all engineering disciplines. It’s not very easy for all mechanical engineering freshers to find a high paying job.

 

India still lacks the infrastructure and the facilities to improve in the recently emerging sectors such as Automobile, Aviation. Automation and Robotics reducing the opportunities of jobs for mechanical engineering freshers to a great extent but they can find job opportunities in many different fields, one of them being jobs in IT companies.

Yes, a mechanical engineering easily can find a job in an IT company. This is because companies during recruitment offer jobs for mechanical freshers believing that every mechanical engineer is first an ‘engineer’ and therefore is perfectly capable of using their knowledge of science and mathematics to carry out the work in hand after a little training.

In order to get the job, the mechanical engineering freshers must make sure they are well prepared for the AMCAT, have brushed up their knowledge of C & C++ and have proper knowledge of the IT company they are looking for job in, to be able to face the interview.

Now that you know that being a mechanical engineering fresher you can work in an IT company, here is a list of top IT companies that are offering jobs for mechanical freshers:

 

TATA CONSULTANCY SERVICES: Tata Consultancy Services Limited is one of the leading IT companies in India. It is an Indian multinational information technology service, consulting and business solutions company that has its headquarter in Mumbai, Maharashtra.

The freshers are trained in different areas and put into different projects depending upon their suitability to a particular project. The engineering and industrial services(EIS) division of TCS is where a mechanical engineering fresher would rightly belong.

 

WIPRO: Wipro Limited is another IT company that offers jobs for mechanical engineering freshers.

It is an Indian Information Technology Services corporation that has its headquarter in Bengaluru, India.

 

Writing AMCAT exam is one of the ways a fresher can go for off-campus recruitment, or arrange for an interview through referral through anyone working in the company itself.

 

INFOSYS: Freshers looking for jobs in IT companies should consider looking for one in Infosys.

Infosys Limited is an Indian multinational corporation that provides business consulting, information technology and outsourcing services.

It has its headquarters in Bengaluru, Karnataka, India. Infosys has big clients like Harley Toyota, who have core business in mechanical.

However, as a fresher in IT company, your job will be handling, supporting, developing, integrating IT division of such companies. Thus, making sure these clients do not face any hassles in running their IT operations. For this purpose, Infosys gives adequate training to its freshers.

 

COGNIZANT: Cognizant, a growing IT company that provides IT services, including digital, technology, consulting, and operations services, is a wonderful company to start looking for IT job for freshers.

If you do your part, they will push you up. They offer a wide spectrum of benefits and development programs that rewards and equips the freshers to grow and acquire new skills.

Cognizant will give you training according to your domain, so you need not worry being a mechanical engineering fresher of not having the subject knowledge.

 

There are others companies too like Capgemini, HCL, PWC, Accenture etc.


All the best :-) 


Comments

  1. Can’t tell a good article, because it is more than that, thanks keep going...
    Best AMCAT Online Training

    ReplyDelete
  2. Mechanical Engineering Jobs open the gates of receiving good salary opportunities and have great life opportunities ahead. You can find good Mechanical Engineering job opportunities in New Delhi, Gurugram, and Mumbai.

    ReplyDelete
  3. I just want to thank you for sharing your information and your site or blog this is simple but nice Information. I learn something today.

    Mechanical Engineering Services

    ReplyDelete
  4. thanks for sharing a great article in this blog. you can visit here for Previous year paper for GATE Mechanical

    ReplyDelete

Post a Comment

Popular posts from this blog

APRON MECHANISM IN LATHE

APRON MECHANISM IN LATHE Apron Mechanism: Apron is attached to the carriage and hangs over the front side of the lathe bed. It is useful in providing power and hand feed to both carriage and cross-slide. It is also used to provide power feed to the carriage during thread cutting through two half nuts. The construction of apron is shown in Fig. Fig - Apron Mechanism Construction Power is transmitted from the spindle to the lead screw and feed rod through the spindle gear and tumbler gear arrangement. A worm is mounted on the feed rod by a sliding key. The worm meshes with a worm gear on whose axis another gear G1 is attached. Gear G1 is attached to a small gear G2 by a bracket as shown in the diagram. Gear G4 is positioned to be in mesh with the rack gear always. Another gear G3 is mounted on the same axis of gear G4. The carriage hand wheel meant for longitudinal feed is attached to the gear G5 on the same axis. The gears G3 and G5 are always in mesh. The gear G...

DOM MANUAL / B-TECH / MECHANICAL / KUK - TO FIND THE SPEED AND TORQUE OF DIFFERENT GEARS IN AN EPICYCLIC GEAR TRAIN.

OBJECTIVE: TO FIND THE SPEED AND TORQUE OF DIFFERENT GEARS IN AN EPICYCLIC GEAR TRAIN. SPECIFICATIONS : 1.       GEAR TRAIN : SUN GEAR : 14 TEETH 2.       PLANT GEAR: 21 TEETH (2 NOS.) 3.       INTERNAL GEAR WITH : 56 TEETH TORQUE MEASUREMENT ·          INPUT TORQUE – MOTOR CURRENT CALIBRATED FOR MOTOR TORQUE. ·          PLANT CARRIER - PULLEY OF 50 MM DIA AND SPRING BALANCE. ·          INTERNAL GEAR - PULLEY, 120 MM DIA AND SPRING BALANCES. Ø   BOTH PULLEYS ARE PROVIDED WITH ROPE OF 12 Ø   MM DIA Ø   DRIVE MOTOR - 1HP DC MOTOR RPM MOTOR OPERATING ON 220 VOLTS Ø   50 HZ SUPLLY, DRIVING THE SUN GEAR. CURRENT(AMPS) TORQUE 1.00 0.5 1.20 1.5 1.40 2.5 ...

Boiler Mounting - Water Level Indicator

WATER LEVEL INDICATOR Function:   It is indicates the water level inside the boiler to an observer. Working:  The water of the boiler comes into the glass tube through the lower tube and the steam through the upper tube. The water then stands in the glass tube at the same level as in the boiler. Two cocks are used to control the passage of between the boiler and the glass tube while the third cock is in used to discharge some of the water from inside the boiler to see whether the gauge is in proper order or not. The glass tube is protected by means of a cover, made of specially toughened glass, which will prevent any accident that may happen due to breaking of glass tube. It is used for ordinary boilers. Image - Water Level Indicator Figure - Water Level Indicator