Skip to main content

EXPERIENCED TOOL ROOM ENGINEER RESUME FORMAT-1

EXPERIENCED TOOL ROOM RESUME FORMAT-1

This resume is for experienced tool room engineer with cover letter having more than 6 years of experience and knowledge of some specific design software………


ABC SINGH
Contact: +91-0000000000, ~ E-Mail: xyz@yahoo.com

Seeking career enhancement opportunities in the field of Mechanical Engineering with organization of high repute
Location Preference: Anywhere in India or outside of India
                                     

PROFESSIONAL SYNOPSIS
About 6 years of experience in Tool Room in automobile industry & Possess strong research, analytical, problem-solving and interpersonal communication skills with hands on experience.


GROWTH PATH
Organizational Experience:
v  Working as a Sr. Engineer (Tool Room) in ABC AUTO LTD., Manesar from 12 Dec, 2011 to till date.
v  Worked as an Engineer (Development & Tool room Engineer) in ABC METALS LTD, Gurgaon from 8 Sep, 2008 to 10 Dec, 2011 date.

SCHOLASTICS
v  Diploma in Mechanical Engineering from XYZ University in 2009
v  ITI Technical Board of U.P., Uttar Pradesh. In Year 2006
v  Intermediate (HBSE board) from Education Board of U.P., Uttar Pradesh in 2005
v  High School (HBSE Board) from Education Board of U.P., Uttar Pradesh in 2003

SOFTWARE PACKAGE (DESIGN)
Ø  Auto Cad
Ø  Catia
Ø  Solidworks

IT SKILLS
v  Application software: MS Office (word, Excel & Power Point)
v  Platform: Windows XP, Window Vista, Window 7, Window 8
v  Internet Applications



For downloading the complete resume Please Click Here
Labels:

Comments

Post a Comment

Popular posts from this blog

APRON MECHANISM IN LATHE

APRON MECHANISM IN LATHE Apron Mechanism: Apron is attached to the carriage and hangs over the front side of the lathe bed. It is useful in providing power and hand feed to both carriage and cross-slide. It is also used to provide power feed to the carriage during thread cutting through two half nuts. The construction of apron is shown in Fig. Fig - Apron Mechanism Construction Power is transmitted from the spindle to the lead screw and feed rod through the spindle gear and tumbler gear arrangement. A worm is mounted on the feed rod by a sliding key. The worm meshes with a worm gear on whose axis another gear G1 is attached. Gear G1 is attached to a small gear G2 by a bracket as shown in the diagram. Gear G4 is positioned to be in mesh with the rack gear always. Another gear G3 is mounted on the same axis of gear G4. The carriage hand wheel meant for longitudinal feed is attached to the gear G5 on the same axis. The gears G3 and G5 are always in mesh. The gear G
14 comments
Read more

Boiler Mountings - Dead Weight Safety Valve

DEAD WEIGHT SAFETY VALVE Function:- A valve is placed upon a valve seat that is fixed upon a long vertical pipe having a flange at the bottom for fixing at the top of the boiler. Suspended at the top of the valve is the weight carrier that carries cast iron rings. The total weight must be sufficient to keep the valve on its seat against the normal working pressure. When the steam pressure exceeds the normal limit, it lifts the valve with its weight & the excess steam escape through the pipe to the outside. This valve is used only with stationary type of boilers. It is the most elementary type of safety valve. The objection to dead weight safety valve is the heavy weight that has to be carried. Image - Dead Weight Safety Valve Figure - Dead Weight Safety Valve
10 comments
Read more

DOM MANUAL / B-TECH / MECHANICAL / KUK - TO FIND THE SPEED AND TORQUE OF DIFFERENT GEARS IN AN EPICYCLIC GEAR TRAIN.

OBJECTIVE: TO FIND THE SPEED AND TORQUE OF DIFFERENT GEARS IN AN EPICYCLIC GEAR TRAIN. SPECIFICATIONS : 1.       GEAR TRAIN : SUN GEAR : 14 TEETH 2.       PLANT GEAR: 21 TEETH (2 NOS.) 3.       INTERNAL GEAR WITH : 56 TEETH TORQUE MEASUREMENT ·          INPUT TORQUE – MOTOR CURRENT CALIBRATED FOR MOTOR TORQUE. ·          PLANT CARRIER - PULLEY OF 50 MM DIA AND SPRING BALANCE. ·          INTERNAL GEAR - PULLEY, 120 MM DIA AND SPRING BALANCES. Ø   BOTH PULLEYS ARE PROVIDED WITH ROPE OF 12 Ø   MM DIA Ø   DRIVE MOTOR - 1HP DC MOTOR RPM MOTOR OPERATING ON 220 VOLTS Ø   50 HZ SUPLLY, DRIVING THE SUN GEAR. CURRENT(AMPS) TORQUE 1.00 0.5 1.20 1.5 1.40 2.5 1.60 3.0 1.80 4.0 2.00 5.0 2.20 6.0 MOTOR  CALIBRATION  CHART THEORY : WHENEVER THE DISTANCE BETWEEN THE DRIVING AND DRIVEN MEMBER, (BOTH SHAFTS ARE NOT OPERATING ON THE SAME A
351 comments
Read more