Skip to main content

MAINTENANCE & ITS TYPES


MAINTENANCE AND ITS TYPES

MAINTENANCE:-
MAINTENANCE INVOLVES KEEPING THE WORKPLACE, ITS STRUCTURES, EQUIPMENT, MACHINES, FURNITURE AND FACILITIES IN GOOD REPAIR AND OPERATING EFFICIENTLY AND SAFELY

BREAKDOWN MAINTENANCE
IT MEANS THAT PEOPLE WAITS UNTIL EQUIPMENT FAILS AND REPAIR IT. SUCH A THING COULD BE USED WHEN THE EQUIPMENT FAILURE DOES NOT SIGNIFICANTLY AFFECT THE OPERATION OR PRODUCTION OR GENERATE ANY SIGNIFICANT LOSS OTHER THAN REPAIR COST.

PREVENTIVE MAINTENANCE
IT IS A DAILY MAINTENANCE (CLEANING, INSPECTION, OILING AND RE-TIGHTENING), DESIGN TO RETAIN THE HEALTHY CONDITION OF EQUIPMENT AND PREVENT FAILURE THROUGH THE PREVENTION OF DETERIORATION, PERIODIC INSPECTION OR EQUIPMENT CONDITION DIAGNOSIS, TO MEASURE DETERIORATION. IT IS FURTHER DIVIDED INTO PERIODIC MAINTENANCE AND PREDICTIVE MAINTENANCE. JUST LIKE HUMAN LIFE IS EXTENDED BY PREVENTIVE MEDICINE, THE EQUIPMENT SERVICE LIFE CAN BE PROLONGED BY DOING PREVENTIVE MAINTENANCE.
  •  PERIODIC MAINTENANCE (TIME BASED MAINTENANCE - TBM)

TIME BASED MAINTENANCE CONSISTS OF PERIODICALLY INSPECTING, SERVICING AND CLEANING EQUIPMENT AND REPLACING PARTS TO PREVENT SUDDEN FAILURE AND PROCESS PROBLEMS. 
  •  PREDICTIVE MAINTENANCE

THIS IS A METHOD IN WHICH THE SERVICE LIFE OF IMPORTANT PART IS PREDICTED BASED ON INSPECTION OR DIAGNOSIS, IN ORDER TO USE THE PARTS TO THE LIMIT OF THEIR SERVICE LIFE. COMPARED TO PERIODIC MAINTENANCE, PREDICTIVE MAINTENANCE IS CONDITION BASED MAINTENANCE. IT MANAGES TREND VALUES, BY MEASURING AND ANALYZING DATA ABOUT DETERIORATION AND EMPLOYS A SURVEILLANCE SYSTEM, DESIGNED TO MONITOR CONDITIONS THROUGH AN ON-LINE SYSTEM.

CORRECTIVE MAINTENANCE
IT IMPROVES EQUIPMENT AND ITS COMPONENTS SO THAT PREVENTIVE MAINTENANCE CAN BE CARRIED OUT RELIABLY. EQUIPMENT WITH DESIGN WEAKNESS MUST BE REDESIGNED TO IMPROVE RELIABILITY OR IMPROVING MAINTAINABILITY.

MAINTENANCE PREVENTION
IT INDICATES THE DESIGN OF A NEW EQUIPMENT. WEAKNESS OF CURRENT MACHINES ARE SUFFICIENTLY STUDIED (ON SITE INFORMATION LEADING TO FAILURE PREVENTION, EASIER MAINTENANCE AND PREVENTS OF DEFECTS, SAFETY AND EASE OF MANUFACTURING) AND ARE INCORPORATED BEFORE COMMISSIONING A NEW EQUIPMENT.
Labels:

Comments

  1. operation and maintenance26 June 2013 at 12:58

    This blog is very useful..
    Thank you

    ReplyDelete
  2. Unknown9 October 2013 at 21:13

    Thanks for sharing! This page was very informative and I enjoyed it. Predictive maintenance

    ReplyDelete
  3. Unknown17 October 2013 at 11:48

    I think it is very effective post for us. Thanks for this nice and Helpful post. There is exciting moderately nice about the "MAINTENANCE & ITS TYPES". I like the suggestion.
    I think, Professional property maintenance companies provide valuable services that can save homeowners time, energy, and money.
    I want to share some Information about maintenance service.

    ReplyDelete
  4. Yes Sandy23 May 2014 at 13:12

    All the post was very useful..thx


    Can u pls share info of simatic S200 plc working & drg details

    ReplyDelete
  5. Unknown12 September 2014 at 20:10

    good one

    ReplyDelete
  6. Atico Export1 December 2015 at 17:16

    nice blog about maintenance and it's types. i was looking for blogs related of Types of Mechanical Components and their uses , then i found this blog, this is really nice and having valuable information.

    ReplyDelete
  7. Anonymous15 September 2016 at 14:17

    Great article! Here I have a link to the useful site, that offers pipe renovations, maintenance, drainage and more services: LVI-Talo Salmenautio Check it sometimes!

    ReplyDelete
  8. Unknown11 November 2016 at 16:48

    Thank you for giving valuable information about maintenance,it was very useful to in maintaining department

    ReplyDelete
  9. Anonymous17 March 2017 at 23:32

    thanks for sharing such a nice information

    ReplyDelete
  10. Unknown16 November 2017 at 16:26

    nice article

    ReplyDelete

Post a Comment

Popular posts from this blog

APRON MECHANISM IN LATHE

APRON MECHANISM IN LATHE Apron Mechanism: Apron is attached to the carriage and hangs over the front side of the lathe bed. It is useful in providing power and hand feed to both carriage and cross-slide. It is also used to provide power feed to the carriage during thread cutting through two half nuts. The construction of apron is shown in Fig. Fig - Apron Mechanism Construction Power is transmitted from the spindle to the lead screw and feed rod through the spindle gear and tumbler gear arrangement. A worm is mounted on the feed rod by a sliding key. The worm meshes with a worm gear on whose axis another gear G1 is attached. Gear G1 is attached to a small gear G2 by a bracket as shown in the diagram. Gear G4 is positioned to be in mesh with the rack gear always. Another gear G3 is mounted on the same axis of gear G4. The carriage hand wheel meant for longitudinal feed is attached to the gear G5 on the same axis. The gears G3 and G5 are always in mesh. The gear G
14 comments
Read more

Boiler Mountings - Dead Weight Safety Valve

DEAD WEIGHT SAFETY VALVE Function:- A valve is placed upon a valve seat that is fixed upon a long vertical pipe having a flange at the bottom for fixing at the top of the boiler. Suspended at the top of the valve is the weight carrier that carries cast iron rings. The total weight must be sufficient to keep the valve on its seat against the normal working pressure. When the steam pressure exceeds the normal limit, it lifts the valve with its weight & the excess steam escape through the pipe to the outside. This valve is used only with stationary type of boilers. It is the most elementary type of safety valve. The objection to dead weight safety valve is the heavy weight that has to be carried. Image - Dead Weight Safety Valve Figure - Dead Weight Safety Valve
10 comments
Read more

DOM MANUAL / B-TECH / MECHANICAL / KUK - TO FIND THE SPEED AND TORQUE OF DIFFERENT GEARS IN AN EPICYCLIC GEAR TRAIN.

OBJECTIVE: TO FIND THE SPEED AND TORQUE OF DIFFERENT GEARS IN AN EPICYCLIC GEAR TRAIN. SPECIFICATIONS : 1.       GEAR TRAIN : SUN GEAR : 14 TEETH 2.       PLANT GEAR: 21 TEETH (2 NOS.) 3.       INTERNAL GEAR WITH : 56 TEETH TORQUE MEASUREMENT ·          INPUT TORQUE – MOTOR CURRENT CALIBRATED FOR MOTOR TORQUE. ·          PLANT CARRIER - PULLEY OF 50 MM DIA AND SPRING BALANCE. ·          INTERNAL GEAR - PULLEY, 120 MM DIA AND SPRING BALANCES. Ø   BOTH PULLEYS ARE PROVIDED WITH ROPE OF 12 Ø   MM DIA Ø   DRIVE MOTOR - 1HP DC MOTOR RPM MOTOR OPERATING ON 220 VOLTS Ø   50 HZ SUPLLY, DRIVING THE SUN GEAR. CURRENT(AMPS) TORQUE 1.00 0.5 1.20 1.5 1.40 2.5 1.60 3.0 1.80 4.0 2.00 5.0 2.20 6.0 MOTOR  CALIBRATION  CHART THEORY : WHENEVER THE DISTANCE BETWEEN THE DRIVING AND DRIVEN MEMBER, (BOTH SHAFTS ARE NOT OPERATING ON THE SAME A
352 comments
Read more