Skip to main content

IMPORTANT QUESTION OF STATISTICAL QUALITY CONTROL & RELIABILITY (MECHANICAL- 4TH YEAR)


IMPORTANT QUESTION OF STATISTICAL QUALITY CONTROL & RELIABILITY
(MECHANICAL- 4TH YEAR)


QUES 1 (A) DEFINE QUALITY AND DESCRIBE VARIOUS FACTORS AFFECTING QUALITY.                                             
              (B) WHAT IS TQM? DISCUSS ITS SCOPE AND APPLICATION IN INDIAN INDUSTRIES.                              
QUES 2(A) DEFINE QUALITY CIRCLES. DESCRIBE THEIR OBJECTIVES, STRUCTURE AND TECHNIQUES.                     
             (B) EXPLAIN THE CONCEPT OF FISH BONE DIAGRAM                                                                                
QUES 3 (A) EXPLAIN BASIC STATISTICAL CONCEPT? WHAT ARE THE VARIOUS TYPES OF DISTRIBUTION?                 
              (B) WHAT ARE CONTROL CHARTS AND EXPLAIN ITS OBJECTIVES.                                                              
QUES 4   A SUBGROUP OF 5 ITEMS EACH ARE TAKEN FROM A MANUFACTURING PROCESS AT A REGULAR INTERVAL. A CERTAIN QUALITY CHARACTERISTICS IS MEASURED AND  X AND R  VALUES COMPUTED . AFTER 25 SUBGROUPS IT IS FOUND THAT ∑X=357.50 AND ∑ R =8.80. IF THE SPECIFICATIONS LIMIT ARE 14.40 ±0.40  , AND IF THE PROCESS IS IN STATISTICAL CONTROL , WHAT CONCLUSION CAN YOU DRAW ABOUT THE ABILITY OF THE PROCESS TO PRODUCE ITEM WITH SPECIFICATIONS  ? (D₂ = 2.326).                                                                                                                         
QUES 5 WRITE A BRIEF NOTE ON
(a)  PROCESS CAPABILITY
(b)  DEFECTS  AND DEFECTIVES                                                                                                                   
QUES 6 DEFINE SAMPLING. WHY IT IS NEEDED? DRAW AN OC CURVE AND DESCRIBE CONSUMER AND PRODUCERS    RISK.                                                                                                                                                                   
QUES7 EXPLAIN SINGLE AND DOUBLE SAMPLING PLAN.                                                                                   

Comments

  1. measuring news30 September 2021 at 15:12

    Trimaster Metrology Services Trimaster Metrology are into marketing, sales, training, servicing & calibration of “Metrology, Quality testing, Measuring instruments & software solutions” for varied industries.
    About us 400+ AMC Contracts 2500+ Active Customers 10 OEM Partners 10 Regional Offices (Sales & Service) 6 Year Old Entity 35 Team Strength Our presence across the country enables us to pioneer enhanced reach and customer support.

    ReplyDelete

Post a Comment

Popular posts from this blog

APRON MECHANISM IN LATHE

APRON MECHANISM IN LATHE Apron Mechanism: Apron is attached to the carriage and hangs over the front side of the lathe bed. It is useful in providing power and hand feed to both carriage and cross-slide. It is also used to provide power feed to the carriage during thread cutting through two half nuts. The construction of apron is shown in Fig. Fig - Apron Mechanism Construction Power is transmitted from the spindle to the lead screw and feed rod through the spindle gear and tumbler gear arrangement. A worm is mounted on the feed rod by a sliding key. The worm meshes with a worm gear on whose axis another gear G1 is attached. Gear G1 is attached to a small gear G2 by a bracket as shown in the diagram. Gear G4 is positioned to be in mesh with the rack gear always. Another gear G3 is mounted on the same axis of gear G4. The carriage hand wheel meant for longitudinal feed is attached to the gear G5 on the same axis. The gears G3 and G5 are always in mesh. The gear G
14 comments
Read more

Boiler Mountings - Dead Weight Safety Valve

DEAD WEIGHT SAFETY VALVE Function:- A valve is placed upon a valve seat that is fixed upon a long vertical pipe having a flange at the bottom for fixing at the top of the boiler. Suspended at the top of the valve is the weight carrier that carries cast iron rings. The total weight must be sufficient to keep the valve on its seat against the normal working pressure. When the steam pressure exceeds the normal limit, it lifts the valve with its weight & the excess steam escape through the pipe to the outside. This valve is used only with stationary type of boilers. It is the most elementary type of safety valve. The objection to dead weight safety valve is the heavy weight that has to be carried. Image - Dead Weight Safety Valve Figure - Dead Weight Safety Valve
10 comments
Read more

DOM MANUAL / B-TECH / MECHANICAL / KUK - TO FIND THE SPEED AND TORQUE OF DIFFERENT GEARS IN AN EPICYCLIC GEAR TRAIN.

OBJECTIVE: TO FIND THE SPEED AND TORQUE OF DIFFERENT GEARS IN AN EPICYCLIC GEAR TRAIN. SPECIFICATIONS : 1.       GEAR TRAIN : SUN GEAR : 14 TEETH 2.       PLANT GEAR: 21 TEETH (2 NOS.) 3.       INTERNAL GEAR WITH : 56 TEETH TORQUE MEASUREMENT ·          INPUT TORQUE – MOTOR CURRENT CALIBRATED FOR MOTOR TORQUE. ·          PLANT CARRIER - PULLEY OF 50 MM DIA AND SPRING BALANCE. ·          INTERNAL GEAR - PULLEY, 120 MM DIA AND SPRING BALANCES. Ø   BOTH PULLEYS ARE PROVIDED WITH ROPE OF 12 Ø   MM DIA Ø   DRIVE MOTOR - 1HP DC MOTOR RPM MOTOR OPERATING ON 220 VOLTS Ø   50 HZ SUPLLY, DRIVING THE SUN GEAR. CURRENT(AMPS) TORQUE 1.00 0.5 1.20 1.5 1.40 2.5 1.60 3.0 1.80 4.0 2.00 5.0 2.20 6.0 MOTOR  CALIBRATION  CHART THEORY : WHENEVER THE DISTANCE BETWEEN THE DRIVING AND DRIVEN MEMBER, (BOTH SHAFTS ARE NOT OPERATING ON THE SAME A
351 comments
Read more